Tools Page

Here some picture are shown of the tools that i am using. With courtesy for some of these pictures

of Markus Horn of Germany who visited me on Feb. 23rd, 2003. Markus lives near Frankfurt and is

planning on building a Didi 26, as also designed by Dudley Dix.

The router i used most of the time, and a jig to create the holes for the stringers.

The result of the router as used in the top-middle picture, a board of 2,5 meters takes less than 5 minutes !

This is the jig i made to create the plywood scarphes.

The Epoxy-resin that i used, and the result of the fillets, made with epoxy with a viscosity of toothpaste.

Test-fitting the first 300 mm wide 6 mm plywood radius-chine.    And a picture of the workshop.